+- Linux Lite Forums (https://www.linuxliteos.com/forums)
+-- Forum: Hardware - Support (https://www.linuxliteos.com/forums/forumdisplay.php?fid=6)
+--- Forum: Printing and Scanning (https://www.linuxliteos.com/forums/forumdisplay.php?fid=25)
+--- Thread: samsung scanner (/showthread.php?tid=5903)
samsung scanner - iwar - 01-03-2019
my samsung scanner clx6260 have run fin under previous ll ver, now i made a clean install of ll 4.2 and scanner dont work the printer goes fine as is the same maskin clx6260 i stopped the firewal did not help
Re: samsung scanner - torreydale - 01-04-2019
[member=80]iwar[/member] ,
Consider installing the Linux driver for your printer/scanner. I found it here:
https://support.hp.com/us-en/drivers/selfservice/swdetails/samsung-clx-6260-color-laser-multifunction-printer-series/16462350/swItemId/fp-191129-2
Re: samsung scanner - iwar - 01-05-2019
thanks but it is the same driver I have it work fine before with Linuxlite series 3.x but now i installed 4.2 and the printer goes fine but the scanner do not. itś a multimaskin
Re: samsung scanner - firenice03 - 01-05-2019
I came across this...
https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1741977
Has a work around by adding an environmental variable...
Might be worth a try...
Re: samsung scanner - iwar - 01-07-2019
firenice03 I tyed it but no success it seem very right for me but,
It seems to be for usb connection My samsung is conectet via tcp/ip direct to the router and hav been so before workt very fine.from all ouers computers windows and linux
Re: samsung scanner - hridayar - 01-09-2019
check the linux driver available here https://www.printerdriverforwindows.com/driver-samsung-clx-6260
Re: samsung scanner - iwar - 01-12-2019
hridayar
I lookt in to it its the very same files that i have but the scripts are older but i will try them. Thanks hridayar
Re: samsung scanner - iwar - 02-02-2019
still no scanner maybe i have to go back to a older Linuxlite!
Re: samsung scanner - arky217 - 02-09-2019
I also have a Samsung printer/scanner/copier that is connected via ethernet cable to my home network.
I could not get the scanner to work no matter what I tried.
After much researching, I finally found a solution.
On the printer menu, I gave the printer a static address,
in my case it is 192.168.2.111.
Then I added the line, tcp 192.168.2.111
to /etc/sane.d/xerox_mfp.conf
Like magic, the scanner then worked.
Re: samsung scanner - iwar - 11-14-2019
Thanks arky217 i try that, there are som win10 on this network to is that a problem? / Ivar