09-12-2016, 10:06 AM
just an fyi...
To check/verify alignment do:
Where X is the device, and N is the partition number,
like:
It should return a value of 0 (Zero)
dave@asus-mini-1:~$ sudo blockdev --getalignoff /dev/sda1
[sudo] password for dave:
0
To check/verify alignment do:
Code:
sudo blockdev --getalignoff /dev/sdXNWhere X is the device, and N is the partition number,
like:
Code:
sudo blockdev --getalignoff /dev/sda1It should return a value of 0 (Zero)
dave@asus-mini-1:~$ sudo blockdev --getalignoff /dev/sda1
[sudo] password for dave:
0
Upgrades WIP 2.6 to 2.8 - (6 X 2.6 to 2.8 completed on: 20/02/16 All O.K )
Linux Lite 3.0 Humming on a ASRock N3070 Mobo ~ btrfs RAID 10 Install on 4 Disks
Computers Early days:
ZX Spectrum(1982) , HP-150 MS-DOS(1983) , Amstrad CPC464(1984) , BBC Micro B+64(1985) , My First PC HP-Vectra(1987)
Linux Lite 3.0 Humming on a ASRock N3070 Mobo ~ btrfs RAID 10 Install on 4 Disks
Computers Early days:
ZX Spectrum(1982) , HP-150 MS-DOS(1983) , Amstrad CPC464(1984) , BBC Micro B+64(1985) , My First PC HP-Vectra(1987)