(06-01-2017, 10:26 PM)ralphy link Wrote:Code:rsync -PSauv sourcedirectory/* /dev/sdXX/destdirectory/
Ralphy, many thanks for the explanation & code for monitory source & destination drive speeds.
Using the command line you've given me above, how would I substitute the following information...
Source directory: 'home/mike/Downloads' on /dev/sda
Destination directory: 'TVprogrammes1' on /dev/sdb2
I notice 'rsync' is already installed by default in the LL3.4 package - can it also be used to transfer data. If so, is it superior to the GUI copy/paste method? I suppose the problem with the cache bottle-necking is the same whether a GUI or command-line method is used to copy large amounts of data ...
Mike
64bit OS (32-bit on Samsung[i] netbook) installed in [i]Legacy mode on MBR-formatted SSDs (except pi which uses a micro SDHC card):
2017 - Raspberry pi 3B (4cores) ~ [email protected] - LibreElec, used for upgrading our Samsung TV (excellent for the task)
2012 - Lenovo G580 2689 (2cores; 4threads] ~ [email protected] - LL3.8/Win8.1 dual-boot (LL working smoothly)
2011 - Samsung NP-N145 Plus (1core; 2threads) ~ Intel Atom [email protected] - LL 3.8 32-bit (64-bit too 'laggy')
2008 - Asus X71Q (2cores) ~ Intel [email protected] - LL4.6/Win8.1 dual-boot, LL works fine with kernel 4.15
2007 - Dell Latitude D630 (2cores) ~ Intel [email protected] - LL4.6, works well with kernel 4.4; 4.15 doesn't work
2017 - Raspberry pi 3B (4cores) ~ [email protected] - LibreElec, used for upgrading our Samsung TV (excellent for the task)
2012 - Lenovo G580 2689 (2cores; 4threads] ~ [email protected] - LL3.8/Win8.1 dual-boot (LL working smoothly)
2011 - Samsung NP-N145 Plus (1core; 2threads) ~ Intel Atom [email protected] - LL 3.8 32-bit (64-bit too 'laggy')
2008 - Asus X71Q (2cores) ~ Intel [email protected] - LL4.6/Win8.1 dual-boot, LL works fine with kernel 4.15
2007 - Dell Latitude D630 (2cores) ~ Intel [email protected] - LL4.6, works well with kernel 4.4; 4.15 doesn't work