Esata/IDE dock with other USB/Card readers unable to use LL4

[Dookus]

Yes, all seems as it should be except the drives entry is in red txt, the drives not set as bootable nor can Drives Mount them, they are all NTFS, have spent some time in gparted with this result on all drives


Could not mount /dev/sdb1 on /mnt/wwn-0x50014ee000d6b090-part1
[/size]
"# mount -v '/dev/sdb1' '/mnt/wwn-0x50014ee000d6b090-part1'
$MFTMirr does not match $MFT (record 24).
Failed to mount '/dev/sdb1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
# mount -v -t 'ntfs' '/dev/sdb1' '/mnt/wwn-0x50014ee000d6b090-part1'
$MFTMirr does not match $MFT (record 24).
Failed to mount '/dev/sdb1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details."


No faults are found when checked in microsoft [/size]chkdsk