09-25-2020, 05:39 PM
(09-25-2020, 04:03 PM)mog link Wrote: Right I've disabled Suspend and Hibernation in lite Tweaks, I don't know of any other way to do it? but it hasn't cured the problem.
Beers
mog
Hi!

Putting all pieces together, here is what comes out:
1. Hardware power on button is gone. I had this kind of headache some years ago and it took me days to figure it out... Test another one from a different unit to see how it works.
2. Source is gone. Unfortunately, dedicated testing hardware, is too expensive so if you have some connection in a service, test the power source. Many faulty sources have weird behaviour. If you have a spear one, at leat test with this one and then decide; if this is the case, then change it. A SH might fit in. I use lots of SH equipment, so usually it works and it's way cheaper.
Hope this helps!

Get back if still things get sideways. Who knows, maybe I'll be back with a new idea...
Anyway, this is what I encountered several times so, chances it will work, are high enough.
If still things go sideways, than the MB might have some surge among the layers of the PCB (usually there are 5 layers...) and this is out of reach for any kind of service.
Best regards and good luck!

"It's easy to die for an idea. It's way harder TO LIVE for your idea!"
Current Machine:
Dell Precision T1700, 16 GB RAM, SSD Kingston A400, 480 GB.
Laptop:
ASUS X200MA , IntelĀ® CeleronĀ® N2830, 2 GB RAM, SSD Kingston A400, 480 GB.
Current Machine:
Dell Precision T1700, 16 GB RAM, SSD Kingston A400, 480 GB.
Laptop:
ASUS X200MA , IntelĀ® CeleronĀ® N2830, 2 GB RAM, SSD Kingston A400, 480 GB.