07-03-2025, 07:36 AM
Hello,
Sorry for not answering sooner, I was not available this past week.
Below the command results
I'll try Lite 6.6
Thank you!
sudo lspci -s 03:00.0 -v
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 100
Subsystem: Intel Corporation Centrino Wireless-N 100 BGN
Flags: bus master, fast devsel, latency 0, IRQ 36
Memory at ddc00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 78-92-9c-ff-ff-a1-3a-fe
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
journalctl -b | grep -i 'iwlwifi\|wlp\'
*This command does not work, I get a message mentionning a backslash to add
Sorry for not answering sooner, I was not available this past week.
Below the command results
I'll try Lite 6.6
Thank you!
sudo lspci -s 03:00.0 -v
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 100
Subsystem: Intel Corporation Centrino Wireless-N 100 BGN
Flags: bus master, fast devsel, latency 0, IRQ 36
Memory at ddc00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 78-92-9c-ff-ff-a1-3a-fe
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
journalctl -b | grep -i 'iwlwifi\|wlp\'
*This command does not work, I get a message mentionning a backslash to add