Hello everybody,

My Webcam HD resolution appears with a lower resolution and with too much "squares". In Windows, the Webcam worked fined because it had the official drivers, but in this OS Linux Lite, when I saw the resolution of the Webcam with a videocall from Facebook to me from my mother, i become scared!

Exist any fix to put the resolution in HD?

Thanks and Regards!

===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

Ign:1 cdrom://Linux Lite 6.4 - Release amd64 dists/ InRelease
Ign:2 cdrom://Linux 22.04 - Release amd64 dists/ InRelease
Err:3 cdrom://Linux Lite 6.4 - Release amd64 dists/ Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Err:4 cdrom://Linux 22.04 - Release amd64 dists/ Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Hit:5 http://repo.linuxliteos.com/linuxlite fluorite InRelease
Hit:6 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:7 http://archive.canonical.com/ubuntu jammy InRelease
Hit:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease
Hit:9 http://archive.ubuntu.com/ubuntu jammy-security InRelease
Hit:10 http://archive.ubuntu.com/ubuntu jammy-updates InRelease
Reading package lists...
E: The repository 'cdrom://Linux Lite 6.4 - Release amd64 dists/ Release' does not have a Release file.
E: The repository 'cdrom://Linux 22.04 - Release amd64 dists/ Release' does not have a Release file.


Contents of the root directory  using ls -1laR hrug

after install and no reboot yet
  GNU nano 6.2                                                          rootfiles.txt                                                                 
.:
total 21
drwx------ 1 root root  100 Nov 10 21:42 ^[[0m^[[01;34m.^[[0m
drwxr-xr-x 1 root root  260 Nov 10 21:24 ^[[01;34m..^[[0m
-rw-r--r-- 1 root root 17566 Mar 29  2023 apt.tar.gz
-rw------- 1 root root  287 Mar 24  2023 .bash_history
-rw-r--r-- 1 root root  1130 Feb  5  2022 .bashrc
drwx------ 1 root root    60 Nov 10 21:17 ^[[01;34m.cache^[[0m
drwx------ 1 root root    60 Nov 10 21:22 ^[[01;34m.config^[[0m
drwx------ 3 root root    34 Apr 29  2016 ^[[01;34m.dbus^[[0m
drwxr-xr-x 2 root root    3 Apr  8  2022 ^[[01;34mDesktop^[[0m
drwx------ 2 root root    88 May  3  2016 ^[[01;34m.gnupg^[[0m
dr-x------ 2 root root    3 Feb 21  2020 ^[[01;34m.gvfs^[[0m
-rw------- 1 root root    20 Apr  8  2022 .lesshst
drwxr-xr-x 3 root root    28 Apr 29  2016 ^[[01;34m.local^[[0m
drwxr-xr-x 2 root root    3 Apr 29  2016 ^[[01;34m.nano^[[0m
-rw-r--r-- 1 root root  161 Dec  5  2019 .profile
-rw-r--r-- 1 root root    0 Nov 10 21:42 rootfiles.txt
-rw-r--r-- 1 root root    66 Mar 30  2018 .selected_editor
-rw-r--r-- 1 root root    0 Mar 11  2022 .sudo_as_admin_successful
drwx------ 3 root root    74 Feb 25  2023 ^[[01;34m.synaptic^[[0m

./.cache:
total 162
drwx------  1 root root    60 Nov 10 21:17 ^[[01;34m.^[[0m
drwx------  1 root root    100 Nov 10 21:42 ^[[01;34m..^[[0m
drwx------  2 root root      3 Apr  8  2022 ^[[01;34mat-spi^[[0m
drwx------  2 root root    27 Mar 29  2023 ^[[01;34mdconf^[[0m
drwxr-xr-x  2 root root    42 Jan 28  2023 ^[[01;34mgstreamer-1.0^[[0m
drwx------  2 root root      3 Feb 21  2020 ^[[01;34mgvfs^[[0m
drwx------  2 root root      3 Feb  5  2022 ^[[01;34mgvfsd^[[0m
drwxr-xr-x 61 root root  1240 Nov 10 21:24 ^[[01;34mmesa_shader_cache^[[0m
-rw-rw-rw-  1 root root 165196 Mar 19  2018 qt_compose_cache_little_endian_467cfa02c550474bb86de9fac8d7106a
drwx------  3 root root    29 Apr 29  2016 ^[[01;34mthumbnails^[[0m
drwx------  3 root root    35 Mar 19  2018 ^[[01;34mwebkit^[[0m
drwx------  4 root root    54 Feb  7  2021 ^[[01;34mzenity^[[0m

./.cache/at-spi:
total 0
drwx------ 2 root root  3 Apr  8  2022 ^[[01;34m.^[[0m
drwx------ 1 root root 60 Nov 10 21:17 ^[[01;34m..^[[0m

Jerry This dont look Right at All...

Bryan  PS Im Trying my hardest to stay away from Windows, but from the looks of the files that installed in root Im having doubts, also the cdrom worked just Fine Before Install.

Would Love to have you ssh into this machine and shed some light on this.

Hi Jerry Thanks for your work On linux Lite.  I can see My printer on the network but when I click it ...It act like its trying to get drivers from the printer but just sits there
and does nothing .  Any Suggestions??

Bryan

Hi all, 

here´s the scenario:

My main system is Linux Lite 6.2 and it is installed on an external HDD.
It´s a “Western Digital Technologies, Inc. Elements 25A2”. So I always boot my system from there. I´ve been doing it this way for years now and it´s been working really well.

9 days ago however, shortly after pressing the on/off button, the status messages reported something about “kernel panic”, and the system wouldn´t boot.  :-[

So I pressed the on/off button (holding it down for a while) in order to power the machine down. The OS hadn´t booted anyway.

Immediately after that I tried again and this time it worked flawlessly. No message of that kind anymore and the OS booted alright.
^-^
I believe the kernel panic message related to a USB device 1-1.2.3, which points to my HDD.

I started the PC every day for the past 9 days and it has been working fine ever since. No problems.

Today however (after 9 days) that kernel panic business happened again.
These are the messages I don´t like:

    - failed to execute /init (error -2)
    - Kernel panic - not syncinc …  no working init found. Try passing init= option to kernel
    - panic …
    - end kernel panic . 

I tried to boot a second time and now it worked flawlessly again.

As for hardware, I think it´s alright for me. I checked the HDD´s health with 'smartctl' and everything looks alright there.
I also tested my RAM with `memtester' from inside the running system and with 'memtest' as well.
No errors reported. I think (and hope) we may rule out any hardware issues.

I´m pretty clueless about this intermittent boot failure...

Does anyone have any ideas?

Thanks a lot in advance.
Many greetings from Rosika  :wave

I got *new* laptop and did a clean installation of Linux Lite 6.6. Ran through the updates and so on.

Everything ran OK, even after a few reboots the same evening.  Then the next day, I started the laptop and after login, the desktop launched OK, then suddenly the screen scrambled (multi-coloured horizontal lines), then blank.  After a few seconds, the laptop rebooted.  Again, logged in OK, desktop started OK, but this time it just went blank.

The next day (yesterday, relative to this post) I did a new clean install.  That evening, all was well.

Home from work now, booted laptop and get the same crash sequence.

The only thing I can think, so far, is that during installation, I checked install third-party drivers, which required me to give a password for secure boot.  It said that I would be asked for this password on next boot up.  However, on both occassions, I have not been asked for the secure boot password.

I am now running this from the USB stick.

The laptop is a Lenovo ideapad 330 with AMD A6 processor and STONEY graphics.

How can I start looking for problem?

Buenas, soy nuevo por aqui.

Pido disculpas si este post lo hago en el sitio incorrecto, desde ya, mejor prevenir que lamentar je.
:imsorry

Bueno, ire al grano, pues mi monitor se suspende en cuanto deja de tener actividad, pero aunque he visto
si quiza las configuraciones de energia eran el problema, pero no vi nada raro, esta todo configurado en "Nunca"
Entonces he decidido consultar, ya que molesta bastante no poder dejar el mouse quieto por 5 segundos sin que
se apague el monitor.

Gracias!
:043:

============ Log ===========

Procesando disparadores para linux-image-5.15.0-88-generic (5.15.0-88.98) ...
/etc/kernel/postinst.d/dkms:
* dkms: running auto installation service for kernel 5.15.0-88-generic
  ...done.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-5.15.0-88-generic
/etc/kernel/postinst.d/zz-update-grub:
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found background: /boot/grub_linux_lite.png
Found background image: /boot/grub_linux_lite.png
Found linux image: /boot/vmlinuz-5.15.0-88-generic
Found initrd image: /boot/initrd.img-5.15.0-88-generic
Found linux image: /boot/vmlinuz-5.15.0-87-generic
Found initrd image: /boot/initrd.img-5.15.0-87-generic
Found linux image: /boot/vmlinuz-5.15.0-86-generic
Found initrd image: /boot/initrd.img-5.15.0-86-generic
Found linux image: /boot/vmlinuz-5.15.0-82-generic
Found initrd image: /boot/initrd.img-5.15.0-82-generic
Found linux image: /boot/vmlinuz-5.15.0-79-generic
Found initrd image: /boot/initrd.img-5.15.0-79-generic
Found linux image: /boot/vmlinuz-5.15.0-52-generic
Found initrd image: /boot/initrd.img-5.15.0-52-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
done
Se encontraron errores al procesar:
grub-efi-amd64-signed
E: Sub-process /usr/bin/dpkg returned an error code (1)

Hi, I have installed Linux Lite from a USB stick onto my daughter's Samsung RC530 laptop which had been running Windows 7 home edition, but which had run into boot I/O problems which I could not overcome despite extensive attempts. The Linux installation was done with Linux as the sole OS and as part of the process Partitions 2 & 3 of the hard drive were reformatted. I am encountering a message in the bios when I try and boot which states: "Reboot and Select Proper Boot Device or Insert Boot media in selected boot device and press a key". Not sure what changes I have to make to get the computer to boot from Linux Lite on the hard drive and so I have been using the usb with Linux Lite for booting and been trying to load install updates. Below is the log I received and was requested to submit to you.

Any help you are able to give to sort my problems would be appreciated. Windows had originally recorded the DVD/CD Rom Drive as DVDWBD TS-LB23A but presently just known as cd drive.



==========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

Ign:1 cdrom://Linux Lite 6.6 - Release amd64 dists/ InRelease
Ign:2 cdrom://Linux 22.04 - Release amd64 dists/ InRelease
Err:3 cdrom://Linux Lite 6.6 - Release amd64 dists/ Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Err:4 cdrom://Linux 22.04 - Release amd64 dists/ Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Hit:5 http://repo.linuxliteos.com/linuxlite fluorite InRelease
Hit:6 http://archive.canonical.com/ubuntu jammy InRelease
Hit:7 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease
Hit:9 http://archive.ubuntu.com/ubuntu jammy-security InRelease
Hit:10 http://archive.ubuntu.com/ubuntu jammy-updates InRelease
Reading package lists...
E: The repository 'cdrom://Linux Lite 6.6 - Release amd64 dists/ Release' does not have a Release file.
E: The repository 'cdrom://Linux 22.04 - Release amd64 dists/ Release' does not have a Release file.

(02-27-2017, 05:00 AM)rokytnji link Wrote: Either one of the above will suit your needs if you change your mind and put questionable files to share on usb with a Windows user.
I have never infected my wife's work windows gear with malware.

Also. I am the best anti-virus by my computer usage and browsing habits. The space between my shoulders handle that job quite nicely.

1. Open Chrome
   
2. See a screen full of attached pop-ups:
   
   
3. Imagine there is only that white space between each pop-up.
   
4. To get rid of the notifications, I click anywhere other than the two included buttons.
   
5. The two buttons are [Activate] and [Settings]. Whereas the link (shown in the second attachment) is [stabledstreaming.com].
   
6. Turning off or restarting and then opening Chrome resumes the broad cycle.
   

1. If I leave the Chrome window active, for 2.5 to 3 minutes, then the pop-up reappears.
   
2. If it is inactive, for 2.5 to 3 minutes, then the pop-up still reappears.
   
3. At your request, I will test whether they reappear

1.      
2. if I don't open Chrome upon rebooting Linux Lite
        
3. if I have closed Chrome using the [ x ], [alt + F4], or killed it with Task Manager